7/1/2023 0 Comments Brass darkening![]() ![]() ![]() This will help avoid further oxidation and dullness. It’s important to keep the cloth and brass polish in constant motion to prevent scratches or other damage.Īfter you’re happy with the look and feel of the brass, make sure to wipe it down with a softened, damp cloth. The best way to do this is by using a brass polish and soft polishing cloth.įirst, apply a moderate amount of brass polish to the cloth and begin to gently buff the area until the brass oxidizes and takes on a dull finish. To dull down bright brass, you’ll need to remove some of the lacquer coating and oxidation that is typically applied to it. Additionally, the oil should be reapplied from time to time to maintain the blackened finish. The blackening process will protect the brass from oxidation, discoloration, and deterioration. To do this, buff the brass with steel wool or sandpaper, and then apply a second coat.Īfter the second coat, rinse off the excess and allow to air dry before wiping with oil. Once the brass is prepped, lather it with the blackening solution and then rinse off the excess in clean water.Īir-drying the brass will have it looking black, however a second coat of the blackening solution will give you a darker, more even finish. This can be done with a combination of soap, water, and a nylon brush. Good luck.New Chrome OS 99 Features You Should Try! It is theoretically possible to chemically remove brass plating from nickel plating - see letter 8423 - but you would probably have to send the items to a plating shop it's probably not practical to do it in a residential environment, so you would be limited to sanding the brass plating off. You may luck out, and the color may be a tint in the lacquer rather than brass plating. See my previous response for how to remove lacquer or clear coats. ![]() I don't know how gold and silver got into the discussion of brass furniture legs :-)Īre you referring to brass plating or brass-toned lacquer but you're calling it gold as in "of a gold-like color"? And are you implying that you have reason to believe (such as from seeing a worn or sanded area) that there is a layer of "silvery colored" metal underneath the brass plating? Yes, it's quite possible that there is a layer of nickel plating under brass plating or brass toned lacquer. What if I want to remove that lacquer finish and the gold finish to get to the silver finish below, is there a chemical to remove this finish easier than sanding it off? Barb BonadonnaĪ. If at all possible, however, try working on an inconspicuous area first because not everything that looks like brass actually is brass. If that doesn't work, the clearcoat isn't lacquer.Īircraft Stripper (methylene chloride) will remove just about any paint or clearcoat but is toxic, noxious stuff requiring goggles goggles, rubber gloves protective gloves Īfter the lacquer or clearcoat is removed, Brass Darkening Solution should work. Lacquer can be removed with lacquer thinner Although you are free to paint your tables, of course, if your preference is to use a darkening solution, you must remove that lacquer or clearcoat so the darkening solution can get to the metal. If they are still bright instead of badly tarnished, it is because there is a lacquer or clearcoat protecting them from the atmosphere. I would appreciate any information you could share.Ī. These tables all have detachable glass tops. This is a project that I'd like to do to save the furniture. How can I strip the remaining finish and then apply a new finish (brass-looking, paint)? We have just repainted all walls and applied laminate flooring. The finish has peeled off in lots of places. These pieces are approximately 10 years old and have been subjected to many different environments (basement, out-door shed). I have brass looking legs on my living room coffee, end, and sofa tables. ↓ Closely related postings, oldest first ↓ Then I'd use any primer made for metal, then you favorite shade of blue lacquer. Nail polish remover may not be highly flammable because of its water content, but acetone is, so be aware. I would suggest wiping with acetone first because brass and bronze are frequently lacquered, and lacquers might react with paint, and acetone is a fairly good cleaner. ![]()
0 Comments
Leave a Reply. |